Are you tired of your computer getting stuck in an endless loop of restarting? Fear not, as we bring you practical solutions to break free from this frustrating cycle. Discover effective methods to fix your computer when it gets stuck on restarting, allowing you to regain control and enjoy uninterrupted usage.
Force Power-Off Your Windows System
To force power off your Windows system when it’s stuck on restarting, follow these simple steps:
1. Press and hold the power button on your PC for about 10 seconds until it shuts down completely.
2. Unplug the power cord from your PC and wait for a few seconds.
3. Plug the power cord back in and press the power button to turn on your PC.
If this doesn’t solve the issue and your PC is still stuck on restarting, you may need to try additional troubleshooting methods or seek expert help. Remember to always backup your important files before attempting any fixes to avoid data loss.
These steps should help you resolve the problem efficiently and get your PC back up and running smoothly.
Remove Peripherals & Clean Boot Windows
To fix a computer stuck on restarting, you can try removing peripherals and performing a clean boot of Windows.
First, remove any external devices or peripherals connected to your computer, such as printers, USB drives, and external hard drives. This can help eliminate any potential conflicts or issues causing the computer to get stuck.
Next, perform a clean boot of Windows. This allows you to start your computer with only the essential drivers and services, which can help identify if any third-party software or services are causing the problem.
To perform a clean boot, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “msconfig” and press Enter to open the System Configuration window.
3. In the General tab, select “Selective startup” and uncheck the box next to “Load startup items.”
4. Go to the Services tab, check the box next to “Hide all Microsoft services,” and click “Disable all.”
5. Go to the Startup tab and click “Open Task Manager.”
6. In the Task Manager window, disable any startup items by right-clicking on them and selecting “Disable.”
7. Close the Task Manager and click “OK” in the System Configuration window.
8. Restart your computer.
This should help you resolve the issue of your computer getting stuck on restarting. If the problem persists, consider seeking assistance from a knowledgeable expert or referring to Microsoft’s support platform.
Run the Windows Troubleshooter
To fix a computer stuck on restarting, you can use the Windows Troubleshooter, a helpful tool built into Windows 10. Follow these steps to run the Troubleshooter:
1. Press the Windows key and type “Troubleshoot settings” in the search bar.
2. Open the Troubleshoot settings from the search results.
3. Scroll down and click on “Additional troubleshooters.”
4. Locate and click on “Windows Update” under the “Get up and running” section.
5. Click on the “Run the troubleshooter” button.
6. Follow the on-screen instructions to complete the troubleshooting process.
7. Once the Troubleshooter finishes, restart your computer and check if the issue is resolved.
By running the Windows Troubleshooter, you can identify and resolve issues related to updates, system settings, and more. It’s a quick and efficient way to fix common problems and get your computer back up and running smoothly.
time.sleep(5) # Simulating a delay for restarting process
print("PC restarted successfully.")
print("PC is stuck on restarting.")
print("Performing troubleshooting steps...")
time.sleep(3) # Simulating a delay for troubleshooting steps
if __name__ == "__main__":
Please note that this code snippet is a simplified example and does not address real-world PC issues. It merely demonstrates a basic program flow to simulate a PC restart and print a success message.
End Unresponsive Processes
If your computer is stuck on restarting and you’re unable to progress past the loading screen, there may be unresponsive processes causing the issue. To fix this problem, follow these steps:
1. Press and hold the Ctrl + Alt + Delete keys simultaneously to open the Task Manager.
2. In the Task Manager window, navigate to the “Processes” tab.
3. Look for any unresponsive processes with a status of “Not Responding.”
4. Right-click on the unresponsive process and select “End Task” to terminate it.
5. Repeat this process for any other unresponsive processes.
6. Once all unresponsive processes have been ended, restart your computer.
This should resolve the issue and allow your computer to boot up correctly. If the problem persists, it may be necessary to further investigate other potential causes.
Remember to regularly update your Windows operating system to ensure optimal performance and prevent similar issues from occurring in the future.
Update Your Device Drivers
1. Open the Device Manager by pressing the Windows key + X and selecting “Device Manager” from the menu.
2. Expand the categories and locate the devices that have a yellow exclamation mark next to them. These are the devices with outdated or missing drivers.
3. Right-click on the device and select “Update driver.”
4. Choose the option to search automatically for updated driver software. Windows will search online for the latest drivers and install them.
5. If the automatic search doesn’t find updated drivers, you can visit the manufacturer’s website and download the latest drivers manually.
6. Once the drivers are updated, restart your computer to apply the changes.
Updating your device drivers can often resolve issues with your computer getting stuck on restarting or experiencing boot loops. Make sure to keep your drivers up to date for a smoother and more reliable computing experience.
Force Windows to re-create the Windows Update Store folder
To force Windows to re-create the Windows Update Store folder when your computer is stuck on restarting, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “services.msc” and press Enter to open the Services window.
3. Scroll down and locate the “Windows Update” service.
4. Right-click on it and select “Stop” to stop the service.
5. Now, open File Explorer and navigate to the following location: “C:\Windows\SoftwareDistribution“.
6. Delete all the files and folders inside the SoftwareDistribution folder.
7. Go back to the Services window, right-click on the “Windows Update” service again, and select “Start” to restart the service.
8. Restart your computer and check if it is still stuck on restarting.
By following these steps, you can resolve issues with the Windows Update Store folder and potentially fix the problem of your computer being stuck on restarting.
Remove Unnecessary Startup/Background Programs
To fix a computer stuck on restarting, you can start by removing unnecessary startup/background programs on your Windows 10 system. These programs can slow down your computer and cause it to get stuck in a restart loop.
Here are the steps to remove these programs:
1. Press Ctrl + Shift + Esc to open the Task Manager.
2. Go to the “Startup” tab.
3. Disable any programs that you don’t need to run at startup by right-clicking on them and selecting “Disable”.
4. Restart your computer and check if the issue is resolved.
By removing unnecessary startup/background programs, you can improve your computer’s performance and resolve the restarting issue. It’s important to only disable programs that you are familiar with and confident won’t impact your computer’s functionality.
If you’re still experiencing issues, there may be other factors causing the problem. Consider seeking further assistance from a knowledgeable technician or referring to other solutions available online.
Disable Third Party Services
To fix a computer stuck on restarting, you can try disabling third-party services. Here’s how:
1. Start by pressing the Windows key + R to open the Run dialog box.
2. Type “msconfig” and hit Enter to open the System Configuration window.
3. In the System Configuration window, go to the “Services” tab.
4. Check the box that says “Hide all Microsoft services” to filter out the non-Microsoft services.
5. Click on the “Disable all” button to disable all the third-party services.
6. Click on the “Apply” button and then click “OK” to save the changes.
7. Restart your computer and check if the issue is resolved.
Disabling third-party services can help identify if any of them are causing the problem. If the issue is resolved after disabling the services, you can enable them one by one to determine the problematic service. Remember to restart your computer after enabling each service to see if the issue reoccurs.
Note: This solution may not work for all cases of a computer stuck on restarting. If the issue persists, it is recommended to seek further assistance or consult a professional.
Disable Fast Startup
To fix a computer stuck on restarting, you can try disabling Fast Startup. Fast Startup is a feature in Windows that can sometimes cause issues during the restart process. To disable it, follow these steps:
1. Press the Windows key + X and select “Power Options.”
2. Click on “Choose what the power buttons do” on the left side of the window.
3. Click on “Change settings that are currently unavailable” at the top of the window.
4. Scroll down to the “Shutdown settings” section and uncheck the box next to “Turn on fast startup.”
5. Click on “Save changes” to apply the settings.
By disabling Fast Startup, you may resolve the computer stuck on restarting issue. If the problem persists, it may be caused by other factors, such as hardware or software conflicts. Consider seeking further assistance from a knowledgeable professional or using Microsoft’s support resources for additional troubleshooting steps.
FIX Windows corruption errors with DISM & SFC tools
Fix Windows corruption errors with DISM & SFC tools to resolve a computer stuck on restarting.
To start, open Command Prompt with admin privileges.
First, run the Deployment Image Servicing and Management (DISM) tool. Type “dism /online /cleanup-image /restorehealth” and press Enter. This tool fixes corruption issues in the Windows image.
Next, run the System File Checker (SFC) tool. Type “sfc /scannow” and press Enter. SFC scans and repairs corrupted system files.
If the tools don’t fix the issue, try safe mode or a clean boot to troubleshoot further.
Remember to restart your computer after running each tool.
By following these steps, you can resolve Windows corruption errors and get your computer out of the restarting loop.
Perform a Clean Windows 10 installation
Performing a clean Windows 10 installation can help fix a computer that is stuck on restarting. Follow these steps to resolve the issue:
1. Create a Windows 10 installation media by downloading the latest version from the official Microsoft website.
2. Insert the installation media into your computer and restart it.
3. Press any key to boot from the installation media when prompted.
4. Select your language preferences and click “Next.”
5. Click “Install Now” to begin the installation process.
6. Accept the license terms and click “Next.”
7. Choose the “Custom: Install Windows only (advanced)” option.
8. Select the drive where you want to install Windows and click “Next.”
9. Follow the on-screen instructions to complete the installation.
10. After the installation is finished, remove the installation media and restart your computer.
Performing a clean installation will erase all data on your computer, so make sure to back up any important files before proceeding.